Service offers
Ideas are the basis for something new
Portfolio
Information
The further processing offers listed represent a part of the possibilities. The list is not exhaustive and is constantly being expanded and adapted. We are always available for further enquiries.
Please note: We only process printed materials that have been printed in-house. Self-printed materials cannot be bound or processed.
The printing service of the Friedrich Schiller University Jena offers you suitable individual printing and material solutions for numerous occasions.
Each event requires a wide variety of individual advertising products. where posters or flyers are used in research and teaching, it is rather image brochures, displays, banners or stickers at trade fairs. The diverse application possibilities are reflected in our product portfolio.
-
Lamination matt scratch resistant
During lamination, the printed sheet is covered with a protective film and is optimally protected against scratches and fingerprints and in many cases even creates a higher color brilliance.
We currently offer three different surfaces and qualities. The scratch-resistant matt film ensures homogeneous colour surfaces, a high-quality look and a pleasant feel due to its typical matt character.
The back is usually not laminated, which simplifies processing and makes the product even more durable. Laminating films are ideal for finishing book covers, flyers, brochures and brochures with special elegance.
The additional finishing of the prints offers many advantages:
- Very high abrasion protection and durability
- High groove and tear resistance· Subjectively increased brilliance of the printing colours
- Wipeable, thus hygienically perfect
- Optimized further processing due to increased mechanical stability, composite effect
-
Lamination glossy
Laminating glossyLet your colors and surfaces shine and marvel at a particularly homogeneous print image and a strong effect of color saturation
-
Lamination matt
Laminating silkThe film lamination protects the surface and gives the whole bond additional stability and abrasion protection. In addition, it gives the product a matt character for a high-quality look.
-
Book binding
Communication via print media still plays an important role in our modern times. The height of the edition and the number of copies can be individually selected in modern digital printing. We print and bind the copies for you from a print run of a book.
We print and bind the books all in house and according to your wishes, and it is important that we only bind printed things. Please feel free to contact us.
The following variants are available:
-
Brochure production
broshure DIN-A5Books and brochures are a popular tool in the marketing mix and help to achieve a wide variety of goals - from company presentation to product marketing.
You can choose from numerous formats and materials to design and configure your product.
The combination of a maximum of two different print media takes place fully automatically in the machine.
Properties
- Paper size min (W x L): 206 x 275 mm
- Brochure size max: 35 sheets (170 pages à 80 g/sqm)
- Paper size max (W x L): 320 x 457 mm
-
Laminate
When laminating, we cover the printed sheets on both sides with a transparent protective film. This protects your prints for the long term and increases their stability for permanent use.
This can be done in two ways:
On the one hand with a kind of foil bag.The printed sheets are inserted into a foil bag and welded with heat and pressure on both sides.
On the other hand, in large-format printing (for posters or posters, for example), these formats are laminated on one side and on two sides, thus finishing and additionally protecting the print image.
-
Cut contours
filmplottCutting contour (CutContour) can be created in freely definable sizes and shapes. The free contours give print products room for a lot of creativity.
For example, a cutting line (CutContour) is required for printing so that stickers can be created in the form you want.
-
Sleeking
SleekingThe digital print finishing -
Over-toner foiling (OTF)In order to further refine printed materials from digital printing, we have the option of processing the printed sheets with foil embossing. With this finishing, the chosen design to be highlighted is printed in digital printing on the desired carrier material.
The printed sheets are then transferred with a so-called sleeking film in a laminating machine with pressure and heat and the desired metal effect is applied. Where the toner has been printed, the metallized layer bonds with the carrier material and achieves a perfect print finishing result with high fineness.
-
Fold
FolderBeim Falzen werden die Druckmaterialien entlang einer Falz-Linie verformt und geknickt. Dies kann in unterschiedlichen Abständen erfolgen. Es stehen Ihnen 8 verschiedene Arten zur Verfügung.
Flyer sind ideal als effizientes Werbemittel in Wort und Bild. Sie bringen wichtige Informationen schnell auf den Punkt.
-
Perforation
perforationPerforation is used to simplify the separation of sheets or certain sections of a sheet. Certain elements can be removed or removed from the perforation line.
-
Groove
operatingWhen grooving, the printed sheet is artificially weakened at the desired location for the later fold. The process prevents breakage of the paper fibres and allows creasing, perforating and folding in a single operation.
-
Personalization
ID CardThe data to be replaced is created in an Excel file. The personalization is then made up of the print data and the fields (variables) to be replaced in the Excel list.
-
Paper cutting
After printing, the printed materials are still cut to the desired final format. Using a flat cutter, we bring the product to the right size.
Cutting range Flat cutter
- minimum stop: 45 mm· width:
670 mm - stacking height max.: 80 mm
- max depth: 680 mm
- minimum stop: 45 mm· width:
-
2-hole and 4-hole punching
hole punchingPaper hole punching is an indispensable tool when it comes to stapling documents in filing systems such as folders, staplers, ring binders or appointment planners. A distinction is made between double and quadruple punching.
The 2-hole punching is the most conventional type of punching and is used almost everywhere, such as in handouts or teaching materials.
The 4-fold punching, on the other hand, is usually used in ring binders or ring binders to give the individual pages a better hold.
-
2-ply and 4-ply stitching
StaplingSingle or double stapling is suitable for loose sheet collections, presentations or documents with a small number of pages. It is the simplest and cheapest binding type.
Copies with a maximum of 100 sheets of 80 g/sqm paper can be stapled or punched.
-
Braille embossing
Blind reading text in braille languagePrinted materials can be embossed barrier-free with information for the visually impaired. The service offers you the opportunity to transmit messages and information in this way.
-
Kapa plate coating
The base of the panels is a thin light foam board with a low weight and excellent performance characteristics. The lightweight board is ideal for permanent use indoors.
Kapa sheets are printed in-house in large format.
Available in 2 thicknesses:
- 2 mm
- 5 mm
Features:
- High rigidity and dimensional stability
- easy to transport and attach
- are finished to the desired format
- perfectly suitable for digital printing
- Featherweight
-
Eyelets
large format printingThe eyelets are used for the secure attachment of banners.The distance of the perforation can be adjusted according to your wishes.
To attach your banners, eyelets in conjunction with useful aids are particularly suitable for fixing to the struts of the bracket or a fence.
-
Edge reinforcement for banners
BannerThe banner material is folded around at the outer edge and thus reinforced by the additional PVC layer and then welded flush. This edge reinforcement serves the better stability (tear resistance) of the eyelets.
-
Hemstitch for banners
You need a hemstitch if you want to push the tarpaulin over a pipe or a rod, then you can hang your PVC tarpaulin so.
-
A1 scanner
OSQThe high-performance color scanner OS Q1 enables the scanning of books, maps, files and similar originals. The maximum size of the document to be scanned is A1.
-
3D printing
3d printing3D printing offers you the right solution to print your digital designs, prototypes and demonstration objects quickly and easily.
-
3D scan
With modern 3D technology, it is possible to convert a real object into a 3D model as precisely as possible and thus easily create a potential 3D printing template. The resulting 3D models can then be used in many ways.
Print Service
Eingang B, Room 1209
Ernst-Abbe-Platz 4, Eingang B
07743 Jena
Google Maps site planExternal link
Office hours:
Mon. - Thurs. 7:30 a.m. - 4:00 p.m.
Fri. 7:30 a.m. - 1:00 p.m.
Pick-Up:
Mon. - Fri. 7:30 a.m. - 9:30 p.m.
(IT Service)